SAS Patch Release Notes - SAS 12.0.1

               Release Note for patched version SAS 12.0.1
	       =================================================

		         Carlos Gabriel  
	                 XMM-Newton SOC
          
A patch to the newly released SAS 12.0.0 version has to be issued, due 
to following reasons:


 fixing a bug in the response matrix generation (arfgen) for PN burst mode data,

 initializing variables in the epatplot task, which otherwise can lead to crashes
(only by some of the binaries distributed)
 
We took the opportunity to establish "ellbeta" (aka 2D-PSF) as default PSF mode parameter in the call 
to edetect_chain and also to upgrade the documentation of several tasks.


 

---

Package arfgen: version 1.83.4 [was 1.83.3]
Package barycen: version 1.20.2 [was 1.20.1]
Package catcorr: version 0.4.4 [was 0.4.3]
Package eboxdetect: version 4.22.3 [was 4.22.2]
Package edetect_chain: version 3.12.2 [was 3.12.1]
Package eexpmap: version 4.6.5 [was 4.6.4]
Package emask: version 2.13.3 [was 2.13.2]
Package emldetect: version 5.17.4 [was 5.17.3]
Package epatplot: version 1.16.1 [was 1.16]
Package ewavelet: version 3.11.2 [was 3.11.1]
Package rgslccorr: version 0.52.1 [was 0.52]
Package sas: version 1.545.1 [was 1.545]
Package arfgen: version 1.83.4 [was 1.83.3]

ChangeLog

Version 1.83.4 - 2012-06-18 (RDS)
------------
	+ (src/ConcreteArfDataServer.cc) - Fixed problem with the PSF 
					   calculation for the FAST modes
					   where a subset of the full-Y
					   range is taken. (SPR-6733)

Version 1.83.3 - 2012-05-17 (RDS)
------------
	+ (src/ConcreteArfDataServer.cc, - Put some logic into the calculation
	   config/arfgen.par)		   of the default badpixresolution to
				   	   make it fine (0.5") if a PSF corr is
					   being calculated and coarse (2") if
					   it isn't. (SPR-6729)

---

Package barycen: version 1.20.2 [was 1.20.1]

ChangeLog

Version 1.20.2 - 2012-06-15 (RDS)
------------
	+ doc/barycen_description.tex		Added warnings into documentation
						(SPR-6740)

Version 1.20.1 - 2012-05-11 (AI)
------------
	+ Heliocentricorr documentation updated.
	+ Heliocentricorr parameters modifed.
	

---

Package catcorr: version 0.4.4 [was 0.4.3]

ChangeLog

Version 0.4.4 - 2012-06-14 (CGP/LUX)
----------------------
- Improved warning and error messages, extended documentation.

Version 0.4.3 - 2012-05-21 (CGP/LUX)
----------------------
- Adds physical units to columns RA_CORR, DEC_CORR, LII_CORR, BII_CORR, ref SPR 6727

---

Package eboxdetect: version 4.22.3 [was 4.22.2]

ChangeLog

Version 4.22.3 - 2012-06-18 (IT)
---------------------------------

	+ Documentation: Typographical and formal corrections,
	  fixed broken Errors Section.
	

Version 4.22.2 - 2012-03-27 (IT)
-------------------------------                                                                                                                                                                                       
	+ Marked parameter mergedlistset as "not yet implemented" in
	  documentation and parameter file (SPR-6571)
	+ Added parameter descriptions to documentation
	  (withimagebuffersize, imagebuffersize, SPR-6700)
	+ Removed unused imagebuffersizesets entry from parameter file:
          parameter is "imagebuffersize" (SPR-6700)

	

---

Package edetect_chain: version 3.12.2 [was 3.12.1]

ChangeLog

Version 3.12.2 - 2012-06-19 (IT)
--------------
	+ Copy of version 3.13; version number changed for the patch.


Version 3.13 - 2012-05-29 (IT)
--------------

	+ Changed default value of parameter psfmodel to ellbeta
	  (SPR-6742).
	+ Documentation: Minor corrections.
	
	
Version 3.12.1 - 2012-03-26 (IT)
--------------                                                                                                                                                                                                       

	+ Included parameters withimagebuffersize, imagebuffersize for
	eboxdetect and emldetect (SPR-6549)
	+ Updated documentation: replaced dead link (SPR-6491, SPR-6629),
	adjusted ecf example values, added information on parameters,
	added task links to parameter list, removed typos

	

---

Package eexpmap: version 4.6.5 [was 4.6.4]

ChangeLog

Version 4.6.5 - 2012-06-11 (IT)
-------------------------------

	+ Documentation: Typographical and grammatical corrections. Fixed
	  formal bug which broke the latex run.


Version 4.6.4 - 2012-03-23 (IT)
-------------------------------

	+ Finally removed description of obsolete parameter pattern from
	  the documentation (SPR-6518)
	

---

Package emask: version 2.13.3 [was 2.13.2]

ChangeLog

Version 2.13.3 - 2012-06-16 (IT)
---------------------------------

	+ Documentation: Typographical, grammatical, and formal corrections.
          Fixed broken Errors Section (SPR-6741).
	  Made consistent with parameter file.

Version 2.13.2 - 2011-02-14 (RS)
---------------------------------

	+ src/emask_mod.f90

	Copies some keywords from the MASK array to the PRIMARY header
	which are needed in detection tasks (SCR-314)

---

Package emldetect: version 5.17.4 [was 5.17.3]

ChangeLog

Version 5.17.4 - 2012-06-13 (IT)
--------------
	+ Documentation: Typographical and grammatical corrections (closes
	  SPR-6731) plus updates in form and content.


Version 5.17.3 - 2012-05-13 (IT)
--------------
	+ Corrected bug in emlfit.f90 which caused wrong / zero count
	  rates in very rare cases (e.g. ObsID 0110010701): array indices
	  used for creating the output source list could be wrong after
	  removing a spurious detection from the list (SPR-6724)

---

Package epatplot: version 1.16.1 [was 1.16]

ChangeLog

Version 1.16.1 - 2012-06-15 (AI)
------------------------------

	- (src/epatplot_mod.f90): "CALstat_node" variable initialization in
	case of MOS analysis.
	- (test/epatplot_mos_test): New MOS test harness added.

	
Version 1.16 - 2010-02-24 (HB)
------------------------------

- (doc/epatplot_description.tex): three example plots were updated; 
	                          this closes SPR-6590
	

---

Package ewavelet: version 3.11.2 [was 3.11.1]

ChangeLog

Version 3.11.2 - 2012-06-18 (IT)
--------------------------------
	+ Documentation: Figures were missing in html version of the
	  documentation. Minor formal and typographical corrections.


Version 3.11.1 - 2012-03-26 (IT)
--------------------------------

	+ Correct default value and ranges for parameter edgethreshold in
          documentation (SPR-6570)

---

Package rgslccorr: version 0.52.1 [was 0.52]

ChangeLog

Version 0.52.1 -  2012-06-08 (AI) 
-------------
	+ Attribute keyword HDUCLAS2 changed to NET in case bkg subtraction is applied.
	
Version 0.52 -  2010-07-21 (AI) 
-------------
	+ Bug fixed when only order 2 is selected and the wavelength filtering is enabled.
	SOC-SPR-6623 fixed
	

---

Package sas: version 1.545.1 [was 1.545]

ChangeLog

Version 1.545.1 - 2012-06-21 (EO)
---------------
	+ AKA: 12.0.1. 
	  Patched version of SAS 12.0.0 with the following updated packages:
	  - arfgen-1.83.4
	  - rgslccorr-0.52.1
	  - epatplot-1.16.1
	  - catcorr-0.4.4
	  - barycen-1.20.2
	  - eexpmap-4.6.5
	  - edetect_chain-3.12.2
	  - emldetect-5.17.4
	  - emask-2.13.3
	  - ewavelet-3.11.2
	  - eboxdetect-4.22.3

Version 1.545 - 2012-05-23 (EO)
-------------
	+ configure_install: Added 1 to exit due to error, to allow capture of error by
	  the installation script 'install.sh".

---